+8613137718313

Insulation Impregnation

Alkyd Glass Cloth

Alkyd glass linings are made of an alkali – free glass cloth impregnated with alkyd insulation.It has a certain electrical performance and mechanical performance, can be suitable for a long time under the temperature of 130 ℃.It is suitable f……

Alkyd glass linings are made of an alkali – free glass cloth impregnated with alkyd insulation.It has a certain electrical performance and mechanical performance, can be suitable for a long time under the temperature of 130 ℃.It is suitable for use in motor, electrical and transformer oil.

Technical requirements of alkyd glass paint cloth:

1.Alkyd glass paint cloth appearance:

The film should be uniform, free of bubbles, creases, damage and impurities.Open books should not be the same.The bond is damaged.The tape should be cut neatly and should not be taken off.

2.Alkyd glass paint cloth size:

Length: the recommended length is 300.40 +10, 50 +10 m should not be more than two paragraphs, each length should be greater than 10m.

Width: width should not be less than 850mm, width should be consistent.According to user needs, the glass cloth can be straight, oblique (usually along the Angle of 45 ℃) into a width of 15, 20, 25 mm and other width of the belt.The width of the belt is 100mm and below, and the deviation is plus or minus 0.5mm.A band with a width of more than 100 mm, with a deviation of plus or minus 1% of the width.The model is the same as the glass cloth.

The lap joint of the glass cloth with oblique cutting glass is not greater than 10 mm, and the length of lap joint is not greater than 25 mm.

Alkyd Glass Cloth Images

 

 

Leave a message