Epoxy Fiberglass Laminated sheet (3240/Epoxy Sheet)
The product adopts 7628 glass fiber cloth impregnated with epoxy resin by hot pressing. It has high mechanical and electrical properties, good heat resistance and humidity resistance. Products are widely used on mechanical, electronic and electrical equipment as components of insulation parts. The product have higher mechanical properties, electrical properties and high thermal mechanical strength.
|EPGC201||High mechanical and electrical properties, good heat resistance, moisture resistance.|
|EPGC202||FR4||Performance is similar to EPGC201; the flame retardance level is improved to UL F-V0.|
|EPGC203||G10||Performance is similar to EPGC201 and it has advanced heat resistance, high mechanical strength at high temperature, excellent electrical and anti-static properties.|
|EPGC204||FR5||Performance is similar to EPGC203; the flame retardance level is improved to UL F-V0.|
|EPGC306||G11||Performance is similar to EPGC203 and its proof tracking index is improved.|
|EPGC308||Performance is similar to EPGC203 and its heat resistance is improved. It has well mechanical stability at high temperature.|
Electrical Laminated Wood Board (Densified Laminated Wood Board)
This product is made of good birch that is rotarily cut into thin wood layer and then dried, laminated and hot pressed. It has moderate density and high mechanical strength and it is easy to be dried in vacuum and to be processed. With the dielectric constant close to that of transformer oil, it can be used in transformer oil for a long time. It can be processed to insulating and supportive components such as coil plate, core pad and lead support of transformer or mutual inductor.
|Standards: GB/T 20634.3-2008 /IEC61061-2:1998|
|1||Appearance||–||Smooth Surface, Neat Edge Cutting, No Layered Cross-section|
|3||Vertical Bending Strength||A Direction||MPa||≥80||≥65||≥65||≥55|
|4||Impact Strength||A Direction||KJ/m2||≥15||≥13||≥13||≥10|
|6||Vertical Electrical Strength
(90℃ transformer oil)
|7||Parallel Breakdown Voltage
(90℃ transformer oil)
|8||Contamination to Liquid Dielectric||–||≤0.1|
|9||Shrinkage after Drying||A Direction||％||≤0.3||≤0.3||≤0.3||≤0.3|
|Application Scope of Laminated Wood Insulating Parts used for Transformer||Transformer Rating||≤110KV||≥110KV||66-35KV||≥ 35KV|
Phenolic Laminated Cotton Cloth Sheet(PFCC201/202/203/305)
The product is made of cotton impregnated with phenolic resin and is formed by hot pressing, which has strong mechanical and electrical properties.
Ordinary Mechanical and Electrical Properties
|PFCC202||Middle Fine Cotton
Strong Mechanical and Electrical Properties
High Mechanical and Wear-resistant Properties
|PFCC305||Electrical Thin Cotton
High Mechanical and Strong Dielectric Properties
Epoxy Glass Fiber Winding Tube
This product adopts fiber glass yarn that is impregnated with insulation jelly made of epoxy resin and other resins by certain proportion, and then it is rolled in wet method, and dried and finally consolidated by baking. Its heat resistance level is up to Class H, and it also has excellent electrical and mechanical properties, chemical resistance (SF6), low dielectrical loss, no deformation or delamination. It can be used as main insulator on H grade dry-type transformer, load tap changer, electric reactor, lightning arrestor, SF6 inductor, etc.
|Standard：GB/T 5132.1-2009 IEC61212-1:2006|
|2||Vertical Bending Strength (normal)||MPa||400|
|3||Axial Compressive Strength||MPa||≥150|
|4||Parallel Breakdown Voltage (90 ℃ of transformer oil)||Kv||≥40|
|5||Vertical Electrical Strength (90 ℃ of transformer oil) 1mm||Kv/mm||≥11.6|
|6||Surface Voltage Resistance after Wetting||kv||≥12|
|7||Insulating Electrical Resistance after Wetting||Ω||≥1.0109|
|8||Dielectric Loss Factor (50Hz)||–||≤0.05|
Note：The data in the above table only represents typical or average data, just for reference in practical application. It does not bear any responsibility for the use of the product or related legal liability.
Package&Storage: Packaging film wrapped and packed in carton. Store it in dry and clean room at room temperature and keep it from moisture. The storage period is 12 months.